manualshive.com logo in svg

ATS BBR3, Instruction Manual

Share
Download
ATS BBR3 Instruction Manual Download Page 40

MAN - BBR3 - REV: Original | E. Operation

35

The best image size is listed on screen for each position, and are as follows:

•  Report Header Left Image (200x100)
•  Report Header Right Image (200x100)
•  Report Footer Left Image (200x50)
•  Report Footer Right Image (200x50)

If the image entered is a different size it will be resized to fit, but may appear distorted. 

Adding a Test Company

The “Test Company” is any text you wish to enter. It is stored with the test specification and printed on the report that 

this test will generate.

Standard or Data Report

The “Standard Report” check box lets you select a standard report or a data report. The data report is most often 
used to chart in Excel or another similar program to generate additional calculations or graphs.

Deflection Plot and Load Plot

DEFLECTION PLOT and LOAD PLOT set the graph limits when a test is running. They are stored with the test 

specification and are used each time that test spec is run.

Bath Values

The BATH values set the current Temperature and Stir Speed and are saved with the test specification to set the 

values when it is run.

Figure E.12 - Standard Report

Figure E.13 - Data Report

Summary of Contents for BBR3
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands