Atrust t180W, User Manual

Page: 134 / 140

124
A.2 Updating Firmware for Your t180W
Four ways are available to update firmware for your t180W:
Method Description
Atrust Thin Client Menu Downloads firmware from a remote computer and updates firmware for your thin client.
USB Flash Drive Updates firmware with a USB flash drive created by Recovery USB Disk Creator.
Atrust Client Setup Initiates firmware update locally on the thin client with the help of Atrust Client Setup.
Atrust Device Manger Initiates firmware update remotely on the remote computer with Atrust Device Manager.
Using Atrust Thin Client Menu
To update firmware using Atrust Thin Client Menu, please do the following:
1. Connect your thin client to the network, and then restart it.
2. During the POST (Power-On Self-Test) period, press
Esc
on the keyboard to enter Atrust Thin Client Menu.
3. Select Firmware Update and then follow the on-screen instructions to complete the task.
NOTE
• You need to specify the IP address of the firmware server over the network. A
firmware server is the server where Atrust Device Manager is installed and client
firmware files are imported through Atrust Device Manager.
• For more information about Atrust Device Manager, please refer to the User’s
Manual for Atrust Device Manager.
Using a USB Flash Drive
To update firmware using a USB flash drive created by Recovery USB Disk Creator, please do the following:
NOTE
• For instructions on how to create a USB flash drive using Recovery USB Disk Creator,
please refer to the Quick Guide for USB Creator.
1. Plug the USB flash drive, and then restart your thin client.
2. During the POST period, press
F7
to enter the Boot Device menu.
3. Select the USB flash drive on that menu to enter Atrust Thin Client Recovery System screen.
4. Follow the on-screen instructions to complete the task.