Atrust t180W, User Manual

Page: 133 / 140

123
A.1 Resetting Your t180W
Reset Mode enables you to restore settings under Atrust Client Setup to the factory defaults. Additionally, it also
releases a managed t180W from the management of Atrust Device Manager, a management console developed by
Atrust for remote and mass client management.
You can perform Reset Mode locally through Atrust Thin Client Menu.
NOTE
• You can also release a managed t180W remotely from Atrust Device Manager. For
details, please refer to the User’s Manual for Atrust Device Manager.
To reset your t180W, please do the following:
1. Restart your t180W.
2. During the POST (Power-On Self-Test) period, press
Esc on the keyboard to enter Atrust Thin Client Menu.
Atrust Thin Client Menu
Normal boot
Reset Mode
Firmware Update
Reboot
Shutdown
NOTE
• Five options are available on Atrust Thin Client Menu:
Normal boot
,
Reset Mode
,
Firmware Update , Reboot , and Shutdown . See the table below for the
description of each option:
Menu Option Description
Normal boot Powers up your t180W as the normal startup procedure.
Reset Mode
Resets Atrust Client Setup settings and remote management
status for your t180W.
Firmware Update Updates firmware for your t180W through the network.
Reboot Restarts your t180W.
Shutdown Powers off your t180W.
3. Use arrow keys to select Reset Mode , and then press Enter to continue.
4. A message appears prompting you for confirmation. Type
y
to confirm.
5. Upon completion, press Enter to restart.