60
2.12.2
RSTP Main Setting
Figure 2.72 RSTP setting page
RSTP Main setting consists of three sub sections, which are RSTP setting, Bridge info and Port
status, as shown in Figure 2.72. RSTP Main setting is to enable or disable RSTP protocol.
Table 2.27 RSTP main setting descriptions
Label
Description
Factory Default
RSTP enabled
To enable RSTP functionality
Disabled
Priority
To set the device priority. The value is in between
0 and 61440. The lower number gives higher
priority.
32768
Maximum Age
Maximum expected arrival time for a hello
message. It should be longer than Hello Time.
20
Hello Time
Hello time interval in seconds. The value is in
between 1 to 10.
2
Forward delay
Time spent in the listening and learning states in
seconds. The value is in between 4 to 30.
15
RSTP Port setting is also supported. Users can specify Path Cost, Priority, Link type and Edge
function to each port.
Summary of Contents for EH7506
