13
Figure 2.14 Example of ping command
Users can assign an IP address or a domain name to verify network connectivity (see Figure 2.14 for
an example). After entering the IP address/name, please click “Ping” button to start the ping function.
Examples of ping results are shown in Figure 2.15 and Figure 2.16.
Figure 2.15 Example of successful ping command result
Users will have the following result for a failed ping.
Figure 2.16 Example of unsuccessful ping command result
*Note:
If users assign a domain name instead of an IP address, they should assign a DNS first. This can be
done through
Administration
>
IP Settings
as shown in Section 2.3.2.
2.3.5
Ping6
Ping6 is a command to test the network connectivity between the destination device and the
managed switch.
Summary of Contents for EH7506
