AW5300 Wireless Access Point
Chapter 4 Web Console Configuration
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
4-6
4.2.4. Advanced Settings
The Advanced Settings of the device provide the details of wireless network parameters for tuning network
performance. The parameters for the tuning are shown in Figure 4-6. In most case, you do not need to
change the parameters. You may only change “Country Region” and “Country Code” to comply with your
country regulation. The changes of the other parameters will affect the performance of the network.
Please change the parameters with some caution.
Figure 4-6 The Wireless Settings of Advanced Wireless Parameters
4.3. Network Settings
4.3.1. LAN Interface
LAN Interface
The device may get an IP address from DHCP server connected on the LAN interface. To check “Obtain
an IP Address Automatically”, the device will get an IP Address automatically.
Manual Settings
The device may be set with an IP address manually when there is no DHCP Server in the network. The
IP address and Subnet Mask are mandatory. The Default Gateway address will be necessary if you
need to connect the device and associated mobile stations to the Internet.
DNS Server
To connect the device and associated mobile stations to the Internet, DNS address is needed to resolve
the URL and any domain name. The Preferred DNS will be utilized first, and if it is failed, the Alternate
DNS will be utilized. The DNS servers’ IP addresses will be assigned automatically if you enable “Obtain
IP address automatically” (from DHCP server). Otherwise, you need to contact your network
administrator for DNS server address.
