AW5300 Wireless Access Point
Chapter 3 Basic Configuration
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
3-6
3.4.3. Network Address Settings for Wireless Bridge Mode
In Wireless Bridge mode, you can obtain an IP address automatically using DHCP. Otherwise, you can
manually specify the device’s IP address, Subnet Mask and Default Gateway. If you need wired clients
to connect to the Internet, please also specify IP address of your network DNS server. Please consult
your network administrator if you do not have any pre-assigned IP address.
Figure 3-7 Network Settings on LAN interface for Wireless Bridge mode
3.4.4. Network Address Settings for Wireless WDS Hybrid Mode
The network address setting for the device working in Wireless WDS Hybrid mode without router functions
is similar to that in Wireless Bridge mode. The address setting for the device in Wireless WDS mode with
router functions is shown in the following figure.
Figure 3-8 Network Settings on LAN interface for Wireless WDS Hybrid mode
3.4.5. Network Address Settings for Wireless WDS Hybrid Gateway Mode
In additional to the WDS Hybrid Mode, you may configure the device to server as a gateway where it can
create a subnet on the WLAN interface. In this mode, you need to specify the IP Address of this device as
a router to other wireless clients in the private network.
