AW5300 Wireless Access Point
Chapter 3 Basic Configuration
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
3-9
Figure 3-13 Regular AP Mode Configuration: Step 4 and 5
3.5.2. Regular AP Gateway Mode Configuration
The configuration flow of the Regular AP Mode is shown below.
Figure 3-14 Regular AP Gateway Mode Configuration: Step 1
Step 1: On
“Overview”
page, choose
“Regular AP
Gateway”
operation mode
and click “Save
Settings”.
Step 2: On
“Basic Settings”
page, change
the SSID as
you wish and
click “Save
Settings”.
Step 3: On
“Security
Settings” page,
setup the
security
functions as
you wish, and
click “Save
Settings”.
Step 4: On
“LAN & WLAN
Interfaces”
page, enter the
“IP Address”,
“Subnet Mask”
and “Default
Gateway”
according to
your network
configuration.
Step 5: Click
“Apply” to save
the settings and
activate the
current
configuration.
