AW5300 Wireless Access Point
Chapter 3 Basic Configuration
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
3-5
3.4.1. Network Address Settings for Regular Access Point Mode
The screenshot of Network Address settings for Access Point Mode is shown in the following figure. The
IP address of the device can be obtained automatically from DHCP Server, or it can be set up manually.
To set the device IP address manually, a pre-assigned IP Address, Subnet Mask, and Default Gateway of
the LAN are needed. Please contact your network administrator if you do not have the pre-defined
values of them.
The IP Address of DNS Server is only needed when you want to connect wireless clients to the Internet.
Please contact your administrator for the IP address of your DNS Server.
Figure 3-5 Network Setting on LAN and WLAN Interface for Regular Access Point mode
3.4.2. Network Address Settings for Regular AP Gateway Mode
In some case, you may set up the access point as a gateway to provide a private network on the WLAN
interface. In this mode, you need to specify the IP Address of this device as a router to other wireless
clients in the private network. The typical IP Address and Subnet Mask of the private network are shown
in the figure.
Figure 3-6 Network Setting on LAN and WLAN Interface for Regular AP Gateway mode
