Atmos D15P, Instruction Manual

Page: 37 / 42

Instruction manual - GB
www.atmos.cz
GB-37
GB
The boiler fan is not
running
- overheated boiler - the fuse
of the safety thermostat has
tripped
-
faulty capacitor - 1μF
- faulty motor
- poor contact in the connec-
tor
of the supply cable from
the motor
- press the target on the thermostat
- replace
- replaces
- check - measure
- repair (rectify)
Defects and shortcomings
of the burner, conveyor
and the ash removing sys-
tem
- no more fuel
- the fuel is cindered and blocks
the chamber on the burner
-
the hose between the con-
veyor and the burner gets
clogged
- the burner does not provide
the required output
- the worm conveyor does not
run (stops)
- other defects of the burner
-the ash removal does not run
when reseting on/off
- replace and
before the new star
draw pellets to the conveyor
- clean the combustion chamber and
hose replace pellets
-
clean the combustion chamber of
the burner once a day until you
burn all the poor-quality pellets
- low calorific value of the pellets,
change the setting
- check and if necessary, replace the
gearbox of the conveyor - defect
- check the quality of pellets, high
resistance = hard pellets, large
diameter of pellets, long pellets
- follow the operation instructions of
the burner
- change ash removal electronic
module placed under the dash
board of the boiler
35. Spares
Heatproof shaped piece – combustion area bottom /6/ 2
Heatproof shaped piece – upper spherical chamber /7/ 1
Heatproof shaped piece – combustion area rear face /14/ 1
Grill /28/ 1
Thermometer /21/ (code: S0041) 1
Main switch /22/ (code: S0096) 1
Control thermostat /23/ (code: S0021) 1
Pump thermostat /24/ (code: S0023) 1
Safety thermostat /25/ (code: S0068) 1
Fuse T6,3A/1500-type H /26/ (code: S0200) 1
Door sealing cord 18 x 18 /12/ (code: S0241) 1
Ash-pan /3/
D15P, D20P (code: P0045), D30P, D40P (code: P0066), D50P (code: P0068) 1
Sealing cord placed between burner and boiler (18x32 mm)
D15P, D20P (code: S0165), D30P, D40P, D50P (code: S0174) 1
Doubleswitch of automatic ash removal and pellet burner /29/ (code: S0098) 1
Cleaning fire hook for cleaning of burner 1