Instruction manual - GB
www.atmos.cz
GB-3
GB
Contents
1. Intended use
5
2. Technical description
5
Control panel appearance
6
3. Technical data
7
Boiler drawings key
8
Technical data
8
Drawings of boilers
9
Extraction ventilator schematics – boiler types D20P, D30P, D40P and D50P
10
4. Supplied boiler accessories
11
Automatic ash removal from the boiler drum
11
5. Fuel
12
Basic wood burning data
12
Fuel heating capacity
13
6. Boiler bases
13
7. Environment type and boiler placement in a boiler room
13
8. Chimney
14
9. Flue-gas duct
14
10. Fire prevention during installation and use of heating appliances
15
11. Connecting boilers to the electric network
16
12. Electric wiring diagram for the boiler D15P without an extraction fan - model 2012 with a 6-pin connector
17
13. Electric wiring diagram for the boilers D20P, D30P, D40P and D50P with an extraction fan - model 2012 with a
6-pin connector 17
14. Electric wiring diagram for the boiler D15P without an extraction fan with a 6-pin connector and
module AD02 to control pump in boiler circuit from burner control unit AC07X (R)
18
15. Electric wiring diagram for the boilers D20P, D30P, D40P and D50P with an extraction fan, modele 2012 with 6-pin
connector and module AD02 - to control extraction fan of the boiler from burner control unit AC07X (R)
18
16. Wiring diagram connection of the boilers D20P, D30P, D40P and D50P with extraction fan, model 2012 with
6-pin connector and two modules AD02 - to control extraction fan of the boiler and pump in the boiler
circuit from burner control unit AC07X (R and R2)
19
17. Wiring diagram connection of the boilers D20P, D30P, D40P and D50Pwith extraction fan, model 2012 with
6-pin connector and module AD03 - to control extraction fan of the boiler and pump in the boiler circuit
from burner control unit AC07X (R and R2)
20
18. Obligatory ČSN EN standards related to boiler designing and installation
21
19. Choice and connection method of control and heating elements
21
20. Boiler corrosion protection
22
21. Prescribed boiler connection with an equalizing tank for burner control on the basis of TS and TV sensors
23
22. Prescribed boiler connection with an equalizing tank and with the ACD01 electronic control unit
23
23. Possible boiler connection with equalizing tank with DHW boiler and with solar system
24
24. Possible boiler connection with Laddomat 21/22
24
25. Laddomat 21/22
25
26. Thermoregulatory valve
25
27. Connection of overheat protecting cooling loop with a safety valve Honeywell TS 130 - 3/4 A or
WATTS STS20
26
28. Operating instructions
26
Preparing boilers for operation when burning pellets
26
Relation of waste gas temperatur to boiler (burner) output when burning pellets
28
29. Placing the shaped pieces into the combustion area
28
Connecting the burner A25 into boilers D15P and D20P
29
Connecting the burner A45 into boilers D30P, D40P and D50P
29
Boiler system with an external silo and conveyor of pellets
30
Boiler room with a large built-in pellet storage
31
Preparing boiler operation for emergency burning wood
32
Ignition and operation when burning alternative fuel - wood
32
Additional secondary air inlet placed under the doorframe
32
Mechanical output regulation – when burning alternative fuel (wood)
33
Draught regulator - HONEYWELL Braukmann FR124 – Assembly instructions
33
30. Fuel refill when burning alternative fuel (wood)
33
31. Boiler cleaning and ash removal
34
32. Heating system maintenance - including boilers
35
33. Use and inspections
35
34. Possible failures and troubleshooting
36
35. Spares
37
Door sealing cord replacement
38
Adjusting the door hinges and locks
38
36. Environmental protection
38
Disposal of the boiler after expiration of its service life
38
GUARANTEE CONDITIONS
39
BOILER INSTALLATION REPORT
40
ANNUAL INSPECTIONS RECORDS
41
RECORDS OF GUARANTEE PERIOD AND POST-GUARANTEE PERIOD REPAIRS
