Atmel ATDH2200E, User Manual

Page: 4 / 27

Table of Contents
ii ATDH2200E Programming Kit User Guide
1417E–CNFG–4/05
2.5.6 Enabling the Clock Output on the AT17LV512A/
010A/002A/040A Configurator............................................................2-7
2.5.7 Disabling the Clock Output on the AT17LV512A/
010A/002A/040A Configurator............................................................2-7
2.6 Using a Configurator with Cypress
®
FPGAs .............................................2-8
2.6.1 Programming the Contents of a *.HEX File to AT17 Devices.............2-8
2.6.2 Converting and Partitioning a *.HEX File............................................2-8
2.6.3 Reading the Contents of the Configurator to a *.BST File..................2-8
2.6.4 Verifying the Device against a *.BST File...........................................2-8
2.6.5 Verifying the Device Polarity (AT17LVxx Devices Only) ....................2-9
Section 3
In-System Programming (ISP) Using Atmel’s ATDH2200E
Configurator Programming System ...................................................... 3-1
3.1 Hardware Setup ........................................................................................3-1
3.1.1 Hardware Requirements.....................................................................3-1
3.1.2 Hardware Connections .......................................................................3-1
3.2 Software Setup .........................................................................................3-2
3.2.1 Software Requirements ......................................................................3-2
3.2.2 Installing and/or Launching CPS ........................................................3-2
3.3 Using a Configurator with Atmel FPGAs/FPSLICs ...................................3-3
3.3.1 Programming the Contents of a *.BST File to AT17 Devices.............3-3
3.3.2 Reading the Contents of the Configurator to a *.BST File..................3-3
3.3.3 Verifying the Device against a *.BST File...........................................3-3
3.4 Using a Configurator with Xilinx FPGAs ...................................................3-4
3.4.1 Programming the Contents of a *.MCS File to the AT17 Devices ......3-4
3.4.2 Converting a *.MCS File .....................................................................3-4
3.4.3 Reading the Contents of the Configurator to a *.BST File..................3-4
3.4.4 Verifying the Device against a *.BST File...........................................3-4
3.5 Using a Configurator with Altera FPGAs...................................................3-5
3.5.1 Programming the Contents of a .POF or .RBF File into
AT17 Devices .....................................................................................3-5
3.5.2 Converting and Partitioning the Contents of a .POF or .RBF File......3-5
3.5.3 Reading the Contents of the Configurator to a *.BST File..................3-5
3.5.4 Verifying the Device against a *.BST File...........................................3-6
3.5.5 Enabling the Clock Output on the AT17LV512A/010A/020A/002A/
040A Configurator ..............................................................................3-6
3.5.6 Disabling the Clock Output on the AT17LV512A/010A/020A/002A/
040A Configurator ..............................................................................3-6