Stand-alone Device Programming Using Atmel’s ATDH2200E Configurator Programming System
ATDH2200E Programming Kit User Guide
2-5
1417E–CNFG–4/05
2.4.5
Verifying the Device
Reset Polarity
(AT17LVxx Devices
Only)
1.
Procedure
➞
Select “/X: Verify device reset polarity”.
2.
Options
➞
Default or previous settings are given. You may need to modify
the following:
– Reset Polarity
➞
Select the reset polarity.
3.
Set JP2
to the VERIFY position on the ATDH2200 board.
4.
Press “Start Procedure”
.
5.
Set JP2
back to the PROGRAM position on the ATDH2200 board.
Notes: 1.
If CPS is being launched for the first time, the clock calibration dialog will
appear. Press “Yes” to proceed and select “High” for accurate calibration.
2.
JP1 for Rev. 12 and 13 boards.
Summary of Contents for ATDH2200E
Page 1: ...ATDH2200E Programming Kit User Guide ...
Page 2: ......
