AT-ANC-108D
13
Installation
Wallplate Installation
1.
Install the mud ring/electrical box (not shown in illustration) as required, then attach the AT-ANC-108D to the mud
ring/electrical box assembly.
2.
Connect the HDBaseT cable to the LAN port on the rear of the AT-ANC-108D.
3. Install the AT-ANC-108D into the mud ring/electrical box, using the two included screws and secure it in place
with a regular screwdriver. Do not overtighten or use high-torque devices to secure the wallplate to prevent
damage to the wall plate and/or the AT-ANC-108D mounting plates.
Wall cross-section
Wallplate holes
