AT-ANC-108D
11
1. Connect an Ethernet cable, from the
LAN
port, on the rear of the unit, to one of the following devices. Ethernet
cables should use EIA/TIA-568B termination:
a.
PoE-compatible switch.
b.
Atlona Power Over Ethernet Mid-Span Power Supply (AT-PS-POE). Use this option if the system endpoint is
not capable of supplying power to the AT-ANC-108D.
Connection Instructions
Installation
3. Complete the installation of the AT-ANC-108D into the electrical box or mud ring. Refer to the
Wallplate
Installation (page 13)
if necessary.
IMPORTANT:
Stranded or patch cable is not recommended due to performance issues.
Sheilded cables are strongly recommended to minimize signal noise and interference.
