![background image](http://html1.mh-extra.com/html/atlas/12awfsl/12awfsl_installation-and-operation-manual_3001396047.webp)
Operation And Use
47
12AWFSL
• Make sure the vehicle is secured;
• Raise the jack by pressing the lifting pedal on the pump.
8.8.2 Standing
• To rest the vehicle at the desired height by releasing the lifting pedal;
• Place the safety pawl on the nearest safety rack by turning down the safety
lever;
• Lower the jack beam by depressing the lowering pedal on the pump to
engage the safety.
• Check to make sure the mechanical safety is engaged before entering the
work area.
8.8.3 To Lower The Jack Beam
• Be sure the under jack is free of any objects;
• Raise the jack beam a little bit by depressing the lifting pedal;
• Release the mechanical safety by turning up the safety lever;
• Depressing the lowering pedal on the pump until the jack beam is lowered
completely.
Summary of Contents for 12AWFSL
Page 1: ...Replace This With Cover PDF ...
Page 16: ...Technical Specification 16 12AWFSL Figure 3A Layout For In Ground Installation ...
Page 17: ...Technical Specification 17 12AWFSL Figure 3B Layout For On Ground Installation ...
Page 21: ...Technical Specification 21 12AWFSL Figure 6 Electrical Plan 220V 1Ph ...