Atlas 12AWFSL, Installation & Operation Manual

Page: 31 / 82

Installation 31
12AWFSL
When routing the hydraulic hoses, make sure that the hoses must
be clear of any moving part. Make sure to keep the hoses clean
from dust.
7.6 Pneumatic System Connection
The pneumatic supply at site (to which the pneumatic system of the lift is
connected) must be equipped with a servicing unit composed of fi lter, lubricator
and regulator.
For the connection of the pneumatic lines proceed as follow:
• Connect the pneumatic lines pre-assembled on the runways to the control
unit referring to the Figure 17;
• Connect the pneumatic system of the lift to the pneumatic supply at site;
• Check the pneumatic control operations for proper performance.
When routing the pneumatic
line, make sure that the tube
is clear of any moving part.
Failure to do so may result in
safety failure which may result
in damage or personal harm.
Figure 17 –
Pneumatic
System
Connection