Installation
22
PVL14OF-EXT
Installation
Only skilled technicians, appointed by the manufacturer, or by
authorized dealers, must be allowed to carry out installation.
Serious damage to people and to the lift can be caused if
installations are made by unskilled personnel. Always refer to the
exploded views attached during installation.
7.1 Tool
Required
• Rotary Hammer Drill D.16
• Hex-Key/Allen Wrench Set
• Masonry Bit
• Crow Bar For Shim Installation
• Hammer
• Chalk Line
• Level
• Medium Cross Screwdriver
• Open-End Wrench Set
• Medium Flat Screwdriver
• Medium Crescent Wrench
• Tape measure
7.2
Checking For Room Suitability
The lift has been designed to be used in covered and sheltered places. The place
of installation must not be next to washing areas, painting workbenches, solvent
or varnish deposits. The installation near to rooms, where a dangerous situation
of explosion can occur, is strictly forbidden. The relevant standards of the local
Health and Safety at Work regulations, for instance, with respect to minimum
distance to wall or other equipment, must be observed.
7.3 Lighting
Lighting must be carried out according to the effective regulations of the place of
installation. All areas next to the lift must be well and uniformly lit.
