Atlas Copco GA 160 VSD, Instruction Book

Page: 36 / 112

“Minimum Speed” 0 “rpm”
“Maximum RPM Reduction” 100 “pct”
“Menu” “Modify”
F1 F2 F3
3.16 Modifying parameters
Function
Control panel
To modify a number of parameters. Consult the menu flow in section Control programs .
Procedure
Starting from the Main screen (see Main screen menu ):
• Press the key “Menu” (F1).
• Press the arrow down key (1) until “Modify parameters” is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• Use the arrow down key until the option “Parameters” is followed by a horizontal arrow.
• Press the tabulator key (2): the first item and its setting will appear.
• Press the arrow down key (1) until the parameter to be modified is followed by a horizontal arrow.
• To modify this setting, press the key “Modify”; the setting starts blinking.
• The key “Limits” can be used to find out the limitations for the parameter. Use the arrow up or arrow
down key to change the value.
• Press the key “Program” to program the new setting or the key “Cancel” to cancel the modification
operation.
The procedure to modify other parameters is similar.
Instruction book
34 APF192090