manualshive.com logo in svg

Atlas Copco GA 160 VSD, Instruction Book

Share
Download
Atlas Copco GA 160 VSD Instruction Book Download Page 27

After pressing the “Menu” (F1) key, the option “Status Data” will be followed by a horizontal arrow:

• Either press the tabulator key (2) to select this menu,
• or use the arrow down key (1) until the desired submenu is followed by a horizontal arrow and then press

the tabulator key (2) to select this menu.

The arrow down key (1) can be used for a quick look at the actual compressor status.

3.8

Main screen menu

Function

Control panel

The Main screen menu shows the status of the compressor operation and is the gateway to all functions
implemented in the regulator.

Procedure

The Main screen is shown automatically when the voltage is switched on.

If the function or arrow keys (1, 2 and 3) are not used for some minutes, the regulator will automatically return
to the Main screen.

Whenever displayed on a submenu screen, press the “Mainscreen” (F1) key to return to the Main screen.

Example of Main screen of GA 132/160 VSD compressors

“Compressor Outlet”

7.5 bar

.
“Compressor Speed”

2100 rpm

“Menu”
F1

F2

F3

The display indicates:

• The name of the sensor and its actual reading

Instruction book

APF192090

25

Summary of Contents for GA 160 VSD

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands