Atlantis LinePower 1151, Manual

Page: 45 / 71

45
Step 4: Network connection
Network/Fax/Phone surge port
Connect a single modem/phone/fax line into surge-protected “IN” outlet on the
back panel of the UPS unit. Connect from “OUT” outlet to the equipment with
another modem/fax/phone line cable. A03-OP3451 doesn’t included this port.
Step 5: Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
The battery charges fully during the first five hours of
normal operation. Do not expect full battery run capability
during this initial charge period.
Step 6: Install software
For optimal computer system protection, install UPS monitoring software to fully
configure UPS shutdown. Please follow steps below to download and install
monitoring software:
 Download and install software from www.atlantis-land.com .

See software document for installation instruction.
 When your computer restarts, the monitoring software will appear as an
orange plug icon ( ) located in the system tray, near the clock.