59
is lighting
on LCD display and
alarm is continuously
sounding.
The icon
and
is flashing
on LCD display and
alarm is sounding twice
every second.
UPS is overload.
Remove excess loads
from UPS output.
UPS is overloaded. Devices
connected to the UPS are fed
directly by the electrical
network via the Bypass.
Remove excess loads
from UPS output.
After repetitive overloads,
the UPS is locked in the
Bypass mode. Connected
devices are fed directly by
the mains.
Remove excess loads
from UPS output first.
Then shut down the UPS
and restart it.
Fault code is shown as
43 and The icon
is lighting
on LCD display and
alarm is continuously
sounding.
The UPS shut down
automatically because of
overload at the UPS output.
Remove excess loads
from UPS output and
restart it.
Fault code is shown as
14 and the icon
is lighting on
LCD display and alarm is
continuously sounding.
The UPS shut down
automatically because short
circuit occurs on the UPS
output.
Check output wiring and if
connected devices are in
short circuit status.
Fault code is shown as 1,
2, 3, 4, 11, 12, 13 and 41
on LCD display and
alarm is continuously
sounding.
A UPS internal fault has
occurred. There are two
possible results:
1. The load is still supplied,
but directly from AC power
via bypass.
2. The load is no longer
supplied by power.
Contact Atlantis SpA.
Battery backup time is
1.
Batteries are not fully
1.
Charge the batteries
Summary of Contents for LinePower 1151
