44
7
Input circuit breaker.
2.3 Setup The UPS
Step 1: UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using
extension cords.
Step 2: UPS output connection
Simply plug devices to output sockets. During power failure, UPS will provide power
to connected devices.
Step 3: Communication connection
Communication port:
RS-232 port Intelligent slot
To allow for unattended UPS shutdown/start-up and status monitoring, connect the
communication cable one end to the RS-232 port and the other to the
communication port of your PC. With the monitoring software installed, you can
schedule UPS shutdown/start-up and monitor UPS status through PC. A03-OP2301
and A03-OP3451 models are equipped with intelligent slot perfect for SNMP, RS-
232, USB card. When installing with these communication card in the UPS, it will
provide advanced communication and monitoring options.
Remove cover of intelligent slot, Insert communication card into the slot and finally
Screw card tightly and complete installation.
Summary of Contents for LinePower 1151
