Starting at Main Menu
Press
MAINT. MENU
you will get the MAINTENANCE MENU P1 screen.
1.- IN-FEED JOG FORWARD
The main rollers will turn in the direction to advance material.
2.- IN-FEED JOG REVERSE
The main rollers
will turn in the direction to reverse the material
3.- X-CUT CLAMP UP
The crosscut clamp bar
will rise.
4.- X-CUT CLAMP DOWN
The crosscut clamp
bar will lower.
5.- IN-FEED ROLL OPEN
The main IN-FEED
pressure rollers will open.
6.-IN-FEED ROLL CLOSE
The main IN-FEED
pressure rollers will close
7.- OUT FEED ROLL OPEN
The pressure roller at the back of the machine will rise.
8.- OUT FEED ROLL CLOSE
The pressure roller at the back of machine will drop.
9.- JOG OUT FEED ROLL
The lower OUT FEED roller will turn in the normal direction of
movement.
10.- JOG WINDER
The windup roller motor will activate.
11.- SLITTER ROLL DOWN
The slitter bypass roller will lower.
12.- SLITTER ROLL UP
The slitter bypass roller will lift.
13.- MANUAL LUBE
The automatic lubrication cycle will activate momentarily.
14.- IO MONITOR
Has two pages, INPUTS and OUTPUTS from the PLC.
From
the
library
of:
Diamond
Needle
Corp
Summary of Contents for 1393E
