Atlanta Attachment Company 1393E, Technical Manual & Parts Lists

Page: 34 / 60

3.- SIZE SELECT.
This is useful to select a preset cut setting for a
desired panel length.
4.- CUT WIDTH Show the value of the actual cut
width according to the width sensor selected.
5.- CUT SENSOR Press Letter and size will be
highlighted
6.- POSITION TRIM BLADES
When the desired changes have been entered move the “Position/Off” selector on the panel to “Position”
and push “Position Trim Blades”. The blades will now readjust to the new setting.
7.- CONTROL POWER START
If the power was shut off for whatever reasons this will need to be pressed to restore control panel
power.
8.- MAIN MENU Return to main Menu.
From
the
library
of:
Diamond
Needle
Corp