Atlanta Attachment Company 1393E, Technical Manual & Parts Lists, Page: 21 / 60

Technical Manual & Parts Lists
2.2.1 Edge Blade Setup & Adjustment Procedure
1) Set the center distance between the LEFT and RIGHT edge trim blade home position
proximity switches to 90.5” (2300mm)
2) On
the touchscreen menu………Select Blade Position. Set a Left Offset value to 5.00”
(127mm) and Cut Length value to 85.00” (2159mm).
3) Press the Blade Position button. As soon as the edge trim blades are at the LEFT and
RIGHT home position proximity switches press the E-Stop button. YOU WILL HAVE
ONLY A FEW SECONDS TO HIT THE E-STOP. If the trim blades come off the
proximity switches, then retry again.
From
the
library
of:
Diamond
Needle
Corp