92
Troubleshooting
Video problems ...
Problem
Suggested solution
Video is
unstable or
only black and
white
Check that you are using the correct broadcast standard
format:
•
See Broadcast Standard in
TV video settings
on
page 15. For proper operation, you must specify your
country in the TV Channels Initialization Wizard (see
page 7
).
•
Check the quality of your incoming TV signal on another
receiver; bad reception may be the cause.
•
Try connecting your tuner directly to the cable TV or
antenna source. Too many splitters in the cable will
degrade the signal.
There is no
video or audio
•
Ensure that your cable or antenna is connected.
•
Ensure that the video connector is set to the correct
source (see Connector in
TV video settings
on
page 15).
•
Check that the audio and video connectors are securely
plugged into the correct jacks.
•
Check that your video card is securely seated in its slot.
Please refer to the user guide for the card location.
Video
recording
stops
unexpectedly
•
Video files are typically very large; ensure that you have
sufficient disk space.
•
Ensure that you are recording to the correct hard disk
— click the Disk Space Settings button in Personal
Video Recorder settings (see
Personal Video Recorder
settings
on page 35).
•
Disable screen savers while recording.
•
Disable Power management while recording.
Summary of Contents for MULTIMEDIA CENTER 8.2
Page 6: ...vi...
Page 106: ...100 Troubleshooting...
