www.atestgaz.pl
5
Other information
5.1
Mechanical mounting of detectors
The control unit module must be installed inside a control cabinet on a DIN35 rail or placed in a terminal
box as shown in Figure 10. The unit must be accessible to system operators but, if possible, prevented from
access of unauthorized persons. Elevation of the installation place must be convenient for operation and
maintenance.
All cables and conductors connected to terminals of the control unit must be terminated with female
sleeves of proper size.
5.2
Commissioning of the unit
No additional commissioning or start-up procedures are necessary after correct installation and
configuration of the unit.
5.3
Utilization
This symbol on a product or on its packaging indicates that the product
must not be disposed of with other household waste. Instead, it is the
user's responsibility to ensure disposal of waste equipment by handing it
over to a designated collection point for the recycling of waste electrical
and electronic equipment. The proper recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the
environment. Information about relevant designated collection points can
be obtained from the Local Authority, waste disposal companies and in the
place of purchase. The equipment can also be returned to the
manufacturer.
5.4
Product marking
Product code
Device
PW-033-A
Control Unit Module Sigma MOD LED
PW-033-C
Control Unit Module Sigma MOD DO
s. 27|31
User Manual: POD-002-ENG R03
Summary of Contents for PW-033-A
Page 40: ...www atestgaz pl Notes...
Page 41: ...www atestgaz pl Notes...
Page 42: ...www atestgaz pl Notes...
Page 43: ......
