ATEQ F6Class, Quick Start Manual

Page: 25 / 32

QSG_F6CLASS.376.00_EN_01 / 2019-03-25
25 / 32
User adjustments
OPTIONS OF THE MENUS
SPE CYCLE menu
Use this menu to carry out specific procedures necessary to ensure the proper operation
of specific measurement cycles.
none
Regulator adjust.
Inf Fill
Piezo auto zero
SPECIAL CYCLE MENU
Label Special cycle Description of the cycle
none None No special cycle selected
Regulator Adj. Regulator adjustment Adjustment of regulator in front panel
Inf Fill Infinite fill Pressurize the part with a infinite fill time
Piezo auto zero Piezo auto zero Auto zero cycle on the piezo sensor
Some parameters are displayed when specific functions are activated.
Label Special cycle Description of the cycle
Custom Unit Learn Custom unit learn Define unit on a master leak
Custom Unit Check Custom unit check Check correct unit learning on a master leak
Chck+Lrn Cust. Unit Custom unit check and
learn Check correct unit learning and relearn if
necessary
LEAK OFFSET LEARN
Leak offset learn Special cycles to determine offset parameters
VOL. LEARN Offset and volume
learn Special cycles to determine offset and volume
parameters (Flow unit)
N START Number start cycle Launch a determined quantity of cycles
TO START SPECIAL CYCLES...
1.
On the
SPECIAL CYCLE MENU
screen, select a
cycle, and press to validate.
2.
Press
Start
to start the cycle.
3.
To stop the current cycle press
Reset
.