QSG_F6CLASS.376.00_EN_01 / 2019-03-25
24 / 32
3.
Repeat these steps until all parameters are set.
4.
To return to the
MAIN MENU
screen, press
Esc
as many times as necessary.
SELECTING A PROGRAM
If necessary, you can select another program.
1.
Press
up/down
.
Pr 001
LEAK TEST
STARTING AND STOPPING CURRENT CYCLE
Use the front panel keys to start/stop a measurement cycle.
With the desired program displayed on the
Program
screen:
STARTING A MEASUREMENT CYCLE
1.
Press
Start
.
The cycle phases of the program are successively displayed:
FILL
stabilization
TEST
DUMP
2.
At the end of the cycle, the results are displayed
and
READY
appears at the bottom right of the
screen.
During the measurement cycle, you may press
to access
the
MAIN MENU
screen and set parameters for a next
measurement cycle.
0.742
bar
40
Pa
Pr 1
READY
OK
14
Pa
STOPPING A CYCLE
3.
Press
Reset
to immediately stop the current
measurement cycle and return to the
Program
screen.
