QSG_F6CLASS.376.00_EN_01 / 2019-03-25
22 / 32
Starting up
POWER UP
1.
Make sure that all the necessary connections are
in place.
Electrical: such as power supply, inputs/outputs
Pneumatic: including line pressure supply
2.
Power up your device.
When power-up is completed, the
Program
screen is
displayed with last program used on screen.
Pr 001
LEAK TEST
PREPARING A PROGRAM
Use this procedure to configure a new test program.
On the MAIN MENU
screen:
ACCESSING THE PARAMETERS
1.
Select
PARAMETERS
using the
up/down
keys and press .
MAIN MENU
SPE CYCLE
PARAMETERS
CONFIGURATION
SERVICE
RESULTS
USB
The program list is displayed.
Pr:01
Copy-Paste
Pr:02
Pr:03
Pr:04
Pr:05
Pr:06
Pr:07
PARAMETERS
SELECTING A PROGRAM NUMBER
2.
Select the program to configure and press .
A list of the available measurement types is displayed:
—
LEAK TEST
type
LEAK TEST
PARAM /TYPE
