QSG_F6CLASS.376.00_EN_01 / 2019-03-25
28 / 32
CONFIGURATION menu
Use this menu to configure your ATEQdevice.
LANGUAGE
PNEUMATIC
AUTOMATISM
SECURITY
MISCELLANEOUS
MAIN /CONFIGURATION
Label
Function
Description
LANGUAGE
Language
Selection of the language displayed on the screen
PNEUMATIC
Pneumatics
Configuration of the pneumatics functions of the device
> ELEC. REG.
-
Activation of the electronic regulator
> REGUL. CTRL.
-
Configuration of the electronic regulator (external or
auto) (option)
> PERM. REG.
-
The electronic regulator is active every time
> PIEZO AUTO AZ
-
Configuration the frequency of the auto zero
> AZ SHORT
-
Deactivation of the linearization of the regulator during
the auto zero process (option)
> Press. UNIT
-
Pressure unit by default for the new programs
> DUMP LEVEL
-
Configuration of the minimum dump level pressure
> BLOW MODE
-
Blowing mode when test cycle is not running (option)
> DUMP OFF
-
Remove dump time parameter on the selected program
that becomes 0 second
AUTOMATISM
Automatism
Configuration of the different communications between
the device and its environment
> RS232
-
Configuration of the communication type on the RS232
port
> USB
-
Configuration of the connection type on the USB port
> Date & Time
-
Setup of the built-in clock
> OUTPUTS CONFIG.
-
Configuration of the programmable outputs
> INPUTS CONFIG.
-
Configuration of the programmable inputs
> CODE READER
-
Bar code reader configuration
SECURITY
Security
Security functions
> ACCESS
-
Parameters access mode (key or password)
> START OFF
-
Deactivation of the Start
on the instrument front
panel. Programs can only be started from the instrument
relay board.
MISCELLANEOUS
Miscellaneous
> SMART KEY
-
Configuration of the assigned function to
the Smart key