QSG_F6CLASS.376.00_EN_01 / 2019-03-25
23 / 32
CONFIGURING THE ASSOCIATED MEASUREMENTS
3.
Select a measurement type and press .
The parameters of the selected measurement type are
displayed.
4.
Define the measurement cycle parameters.
See: Modifying a parameter.
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
2.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
MODIFYING A PARAMETER
Use this procedure to complete the test program setup.
The protection of the parameters is configurable. If the icon
is displayed at the bottom of
the screen, you must insert the USB unlocking device or enter a password before modifying
a parameter.
On the PARAMETERS
screen of the program (see: Preparing a program):
1.
Press
up/down
to select the parameter to
modify, and press .
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
2.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
An arrow
is displayed on the right of the parameter
being modified.
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
2.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
2.
Use the
up/down
up/down
keys
to modify the parameter value, and press to
validate.
The arrow
returns to the left of the modified parameter.
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
1.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
