ATEQ CDP60, User Manual

Page: 33 / 48

Chapter5 – Accessories, security and recycling
UM-24100D-U User manual ATEQ CDP60 Page 23/36
1.7.1. Pressure generator use
Use of the pressure generator with a CDP60 : 1) Adjust the pressure to the
minimum by turning the knob
to the left (watch counter
clockwise).
2) Plug the 6 bar network
pressure to the generator
input.
3) Turn on the CDP60 , wait i
twill be ready.
4) Connect the pressure
generator output to the
CDP60 input.
5) Turn the knob to the right
to increase the pressure, the
pressure value is displayed
by the
CDP60 .
2. RECYCLING
Do not dispose of the rechargeable Lithium-Ion battery or the tool to
the dustbin.
These components must be collected and recycled.
The crossed-out wheeled dustbin means that within the EU the product
must be taken to separate collection at the product end-of life. This applies
to your tool but also to any enhancements marked with this symbol. Do not
dispose of these products as unsorted municipal waste. For further
information, please contact ATEQ.