ATEQ CDP60, User Manual

Page: 28 / 48

Chapter 4 - CDP60 Functions
UM-24100D-U User manual ATEQ CDP60 Page 18/36
2. SPECIALS CYCLES
The specials cycles allows doing commands on the instrument.
2.1. A
UTO
-
ZERO
This special cycle make a zero sensor according to the atmospheric pressure.
Enter into the parameters menu by short press on
the ENTER key.
500.0 Pa
000.0
Select the AUTO ZERO function by using the UP
and DOWN keys validate with the
ENTER key.
SPECIAL CYCLE
>AUTO ZERO
PRINT
SENSOR DISPLAY
If the full scale is more than 5 bars, the instrument
ask to disconnect every pressure source from the
connector and validate with the ENTER key.
Switch off pressure
Enter If Ok
Note : this cycle allows taking over an offset linked to the temperature, position, etc…