ATEQ CDP60, User Manual

Page: 26 / 48

Chapter 3 – Start up, adjust and measures
UM-24100D-U User manual ATEQ CDP60 Page 16/36
3.5. RS232
This parameter is configuring the RS232 port.
Enter into the parameters menu, by pressing and
old the ENTER during 3 seconds.
500.0 Pa
000.0
The PARAMETER menu is displayed. By using the
UP and DOWN key select RS232
parameter.
PARAMETER
BACK LIGHT: 100 %
AUTO OFF: 05 min
>RS232
Then press the ENTER key to enter into the
RS232 links parameters configuration menu.
RS232
>BAUDRATE : 57600
BITS COUNT : 8
PARITY : NONE
Select and adjust each parameter: BAUDRATE ,
BITS COUNT , PARITY , HANDSHAKE and the
EXPORT mode by using the UP and DOWN
key and validate with the ENTER
key.
RS232
BAUDRATE : 19200 <
BITS COUNT : 8
PARITY : NONE
To return to the measurement mode, press
CANCEL .
500.0 Pa
000.0
The EXPORT mode allows modify the frame format, this is to export the measurements
results to a spreadsheet or not (the character strings are separated by a punctuation
mark).
Select YES or NO by using the UP and
DOWN keys and validate with the ENTER
key.
RS232
PARITY : NONE
HANDSHAKE : NO
>EXPORT : YES