ATEN VM5404HA, User Manual

Page: 99 / 122

Chapter 5. CLI Commands
87
EDID Mode Command
Extended Display Identification Data (EDID) is a data that contains a display's
basic information and is used to communicate with the video source.
The formula for the EDID command is as follows:
C C [Enter]
1. For example, to use the Port1 EDID mode, type:
edid port1 [enter]
The following tables show the possible values for the EDID command:
Note: Each command string can be separated with a space.
The following table lists the available EDID commands:
Command Description
edid EDID Mode command
Control Description
port1 Implement the EDID of the connected display to Port 1, and
pass it to the video source.
remix Implement the EDID of each connected display according to its
connection when the VM5404HA / VM5808HA is first powered
on, or immediately after selecting the Remix option.
default Implements ATEN’s default EDID. (default)
custom Implements the customized mode as set in the EDID system
settings. (See
Customized EDID Parameters , page 62)
Command Control Enter Description
edid port1 [Enter] The EDID from Port 1 is passed to the video
source.
edid remix [Enter] The VM5404HA / VM5808HA implements the
EDID of each connected display according to its
connection when the VM5404HA / VM5808HA is
first powered on, or immediately after selecting the
Remix option.
edid default [Enter] ATEN’s default EDID is passed to the video
source.
edit custom [Enter] Implements the customized mode.