VM5404HA / VM5808HA User Manual
28
Profile Pushbutton
The
PROFILE
pushbutton lets users conveniently switch between connection
profiles that have been saved or added to the Profile List (see
When a Profile is in use, its profile number (P1–P16) is shown on the lower
right corner of the LCD display.
The Profile pushbutton functions as follows:
After pressing the Profile pushbutton, available profile numbers will light
up. The active profile number will flash. use the Input/Output pushbuttons
to switch to a specific profile (P1 to P16) or (P1 to P8). Note that:
Input
ports
1–8
or
1-4
correspond to Profile
P1
to
P8
or
P1
to
P4
Output
ports
1–8
or
1-4
correspond to Profile
P9
to
P16
or
P5
to
P8
(where Output Port 1=Profile 9, Output Port 2=Profile 10... Output
Port 8=Profile 16)
The selected pushbutton’s light flashes, and the VM5404HA /
VM5808HA immediately applies the port connections configured in the
selected profile. If the light changes to a steady state, it means the profile is
valid.
After pressing the Profile pushbutton, pressing it again will change to next
profile in Profile Scheduling (see page 37), not the profile list. This feature
is only available while a schedule is playing.
Press the
Cancel
pushbutton to exit
Note:
If there are no profiles configured on the VM5404HA / VM5808HA
device, an error message “
No Available Profile
” is displayed when the
Profile pushbutton is pressed.
A Profile’s port connections can be edited using the front panel pushbuttons
(see
, page 11) or from the
Connections
page of the Browser
GUI (see
Configuring Video Settings of a Profile
, page 39). Additionally, the
Profile List can be configured via the Profile page of the Browser GUI (see
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8
P1
