ATEN VM51616H, User Manual

Page: 90 / 124

VM51616H User Manual
80
Telnet Operation
The VM51616H can be operated and configured via a remote terminal session
using Telnet.
To log into the VM51616H by means of a Telnet session, do the following:
1. On your computer, open a terminal (command line) session.
2. At the prompt, key in the VM51616H’s IP address in the following way:
telnet [IP address]:23
3. Press Enter . The login screen appears. At the login prompt, provide your
Username and Password.
Note: If a user logs on using a Username that is already in session, the newest
login takes effect and the previous session is replaced.
Configuration Menu
Once a Telnet connection to the VM51616H is established, the device’s text-
based Configuration Menu comes up, with the following items:
1. H – Call up the command list for help
Command list:
IP – Set IP address
LO – Load connections from profile nn
PW – Change password
RI– Read what input is connected to nn output
RO – Read what output is connected to nn input
SB – Set the serial port baud rate
SS – Switch input to specified port
SV – Save the current connections into profile nn
TI – Set timeout
VR – Software version information
Ctrl-Q – Quit