manualshive.com logo in svg

ATEN VM51616H, User Manual

Share
Download
ATEN VM51616H User Manual Download Page 89

Chapter 4. Browser Operation

79

Local Output

The VM51616H is designed with a local HDMI output port that allows users 
to monitor multiple input sources in real time. The Local Output page allows 
users to configure the resolution, HDCP, and the Array Mode of the display 
device that is connected to the local HDMI port.

Š

Resolution

: Use the drop-down menu to apply a resolution for the 

display that is connected to the Local Output. Options are: 
560x360@60HZ, 720x576@50HZ, 768x480@60HZ, 
1024x768@60HZ, 1280x720@50HZ, 1280x720@60HZ, 
1920x1080@30HZ, 1280x800@60HZ, 1280x1024@60HZ, 
1366x768@60HZ, 1400x1050@60Hz, 1600x900@60HZ, 
1600x1200@60HZ, 1920x1200@60HZ, 1920x1080@50HZ, and 
1920x1080@60HZ.

Š

Supported HDCP

: Click to check and show the HDCP capability of 

the connected display.

Š

Array Mode

: Use the drop-down menu to select a viewing mode for 

the local display. Options are: 1x1, 1x2, 2x2, and 4x4.

Š

Use the drop-down menu to select the input source for the split screen. 

Summary of Contents for VM51616H





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands