ATEN VM51616H, User Manual

Page: 38 / 124

VM51616H User Manual
28
Security Mode
The Security Mode page allows users to manage the VM51616H’s security-
related settings. Three security modes are available: None, Password Enable,
and Lock Screen. The VM51616H’s password can also be changed here.
To configure the VM51616H’s security settings from the Main Screen, use the
Menu pushbutton to access the Menu page, then press pushbutton 4 to access
the Security Mode page.
Mode
1. To change the VM51616H’s security mode, press pushbutton 1 in Security
Mode.
2. In the Mode menu, to disable security settings, press pushbutton 1 . The
menu will then return to Security Mode. To require a password after the
LCD display times out or is powered off/on, press pushbutton
2 . The menu
will then return to the home screen. To enable a lock screen, press
pushbutton
3 . The menu will then return to the home screen. When Lock
Screen is enabled, pressing any pushbutton from the home screen will
trigger the following message:
Please press “Menu” to start.
Note: If Password is Enabled, the LCD display’s default time-out is 5 minutes.
The VM51616H’s default password is 1234.
1: IP Setting
2: Serial Port Setting
3: Operation Mode
4: Security Mode
: Next
1. Mode: None
2. Change Password
1: None (In Use)
2: Password Enable
3: Lock Screen