ATEN VM51616H User Manual Download Page 12

Page: 12 / 124

VM51616H User Manual

Features

Connects any of 16 HDMI sources to any of to 16 HDMI displays

Multiple Control Methods – system management via front-panel
pushbuttons, RS-232 control, and Ethernet connections (Telnet / Web
GUI)

Seamless Switch™ – ATEN FPGA design unifies video formats to
provide continuous video streaming, real-time switching and stable signal
transmissions*

Scaler – features a video scaling function to convert input resolutions to
the optimum display resolutions

Video Wall – allows you to create custom video wall layouts via intuitive
web GUI*

EDID Expert™ – selects optimum EDID settings for smooth power-up,
high-quality display, and use of the best resolution across different screens

FrameSync – prevents image tearing by synchronizing the scaler output
frame rate to the input signal frame rate

Superior video quality – HDTV resolution of 480p, 720p, 1080i and 1080p
(1920 x 1080)

HDMI (3D, Deep color); HDCP 1.4 compatible

Consumer Electronics Control (CEC) support

Local HDMI output – allows multiple preview of 16 video sources

Audio-enabled; HDMI audio can be extracted to stereo audio

Supports Dolby True HD and DTS HD Master audio

Built-in bi-directional RS-232 serial port for high-end system control

ESD protection for HDMI

Firmware upgradeable

Rack-mountable (2U design)

Note:

When Seamless Switch™ is enabled, mind the following:

Video outputs will not display 3D, Deep Color, or interlace (i.e., 1080i)
resolutions correctly. To use these features, make sure to first disable
Seamless Switch™.

Videos may not display within range, in which case make sure to adjust
the display settings on your device.

Summary of Contents for VM51616H





























































































































Search results

Summary of Contents for VM51616H

Reviews:

Brands by name

Popular brands

ATEN VM51616H, User Manual

Search results

Summary of Contents for VM51616H

Reviews:

Brands by name

Popular brands