manualshive.com logo in svg

ATEN VM51616H, User Manual

Share
Download
ATEN VM51616H User Manual Download Page 87

Chapter 4. Browser Operation

77

Video

The Video page allow you to set Seamless Switch™ options which determine 
how a display performs when the input port is changed. 

Note:

When Seamless Switch™ is enabled:

1. The 

Transition

, 

Period

 and 

Scale Resolution

 options can be enabled. 

2. Video outputs will not display 3D, Deep Color, or interlace (i.e., 

1080i) resolutions correctly. To use these features, first disable 
Seamless Switch™.

3. Videos may not display within range (fit on the screen), in which 

case, make sure to adjust the display settings on your device.

Š

S

eamless Switch™:

 Turning Seamless Switch on removes the video 

distortion and delay seen when an input port is switched. 

Š

Use the drop-down menu to apply to all ports, or the ON/OFF 
button to enable/disable Seamless Switching per port.

Š

Transition

: Allows you to fade the video display when the input port is 

changed. 

Š

Use the drop-down menu to apply to all ports, or ON/OFF button 
to enable/disable Transitions per port.

Š

Use the period option to set the fade speed.

Š

Period

: Sets the fade speed

 

for the Transition option.

Š

Use the drop-down menu to apply an option (

Slow

, 

Normal

, or 

Fast

)

 

to all ports, or lower drop-down menus to apply options per 

port. 

Summary of Contents for VM51616H





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands