manualshive.com logo in svg

ATEN VM51616H, User Manual

Share
Download
ATEN VM51616H User Manual Download Page 111

Chapter 5. RS-232 Commands

101

Read Command

The Read

 

command allows you to view the current configuration, firmware 

and other information about the device.

The formula for the Read command is as follows:

C [Enter] 

1. To view information about the device, type:

read [Enter]

The following table shows the possible values for the 

Read

 command: 

Note:

Each command string should be separated with a space. 

The following table lists the available Read commands:

Reset Command

The Reset command allows you to reset the VM51616H to the default factory 
settings. 

The formula for the Reset command is as follows:

C [Enter] 

The following tables show the possible values for the 

Reset 

command: 

 

Note:

1. Each command string should be separated with a space. 

2. User account settings will not be reset to the factory defaults.

The following table lists the available Reset commands:

Command

Description

read

Read command

Command

Enter

Description

read

[Enter]

View information about the 
device

Command

Description

reset

Reset command

Command

Enter

Description

reset

[Enter]

Resets the device settings

Summary of Contents for VM51616H





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands