ATEN VM51616H User Manual Download Page 65

Page: 65 / 124

Chapter 4. Browser Operation

System Settings

Click the

Settings

link from the Main page for the

System Settings

to open on

the General page:

The

General

page allows you to edit Baud Rate, Language, and Fan

settings as well as view device information.

The

User Account

page allows you to add and edit user accounts.

The

Port Name

page allows you to name each input and output port.

The

Network

page allows configuration of the network settings.

The

EDID

page is used to set the EDID modes.

The

Maintenance

page is for upgrading, backup, and restoring the

device’s firmware.

The

HDCP

page lets users view and set HDCP key settings.

The

OSD/CEC

page allows users to control port OSD and CEC

settings.

The

Video

page allows users to set Seamless Switch™ options which

determine how a display performs when the input port is changed.

The

Read Status

page lists the status overview of the Video Matrix

Switch, including System Network, Device Info, Video Connection,
Audio Connection, CEC, OSD, and Output Resolution.

Summary of Contents for VM51616H





























































































































Search results

Summary of Contents for VM51616H

Reviews:

Brands by name

Popular brands

ATEN VM51616H, User Manual

Search results

Summary of Contents for VM51616H

Reviews:

Brands by name

Popular brands