
Chapter 3. Operation
20
Long Reach Mode
Long reach mode is a modulation that extends the transmission distance up to
150 m using a Cat 5e/6 cable while compromising the maximum frame rate to
1080p, 24 bpp, 60 Hz via a single Cat 5e/6 cable. To enable long reach mode
,
put the HDBaseT long reach mode switch to
ON
at either the transmitter or the
connected receiver.
Note:
When long reach mode is enabled, the VE2812R / VE2812PR will not
be able to transmit 4K signals, in which case, the output display will be
blank.
Sets the unit to the HDMI mode
sw
i
02
Sets the unit to the VGA mode
sw
i
03
Note:
Press
[Enter]
to execute a command.
Task
Command
Control
Input
Port
5
long reach mode switch
VE2812PR
(Rear)
VE2812R
(Rear)
5
long reach mode switch