
Chapter 1. Introduction
10
Note:
The DC-in power LED and link LEDs blink at the same time to indicate that the
firmware upgrade is in progress.
For power redundancy, connect the power jack to a power adapter and the
HDBaseT input port to a PoH PSE-enabled Tx via a Cat 5e / 6 / 6a or ATEN 2L-
2910 cable, and put the PoH PSE & PD switch to
PD
. Both the DC-in power and
PoH power LEDs light green.to indicate that the power redundancy is in effect.
When both the PoH power and DC-in power LEDs are off, the unit is powered off.
No. LED
Indication
Description