
17
Chapter 3
Operation
RS-232 Serial Transmission
The RS-232 Serial Transmission allows you to choose whether to bypass serial
data or to remotely control the VE2812AT / VE2812AUST / VE2812AEUT /
VE3912T using commands depending on your installation.
You can simply switch RS-232 mode between
Command
/
Bypass
by clicking
the RS-232 Serial Communication Switch listed below.
Note:
By default, the VE2812R / VE2812PR is set to
Bypass
serial data.
Bypass
RE-232 serial data is bypassed from the controller PC or Pad to other
connected devices.
Command
You can change the input mode on VE2812R / VE2812AT / VE2812AUST /
VE2812AEUT / VE3912T using RS-232 commands.
RS-232 Serial Communication Switch
RS-232 Serial Communication Switch
VE2812PR
(Rear)
VE2812R
(Rear)