
Chapter 2. Hardware Setup
14
Connecting the VE2812PR Unit
Follow the steps below to connect the VE2812PR to an HDMI-enabled display
source, a compatible ATEN Video Transmitter, and other controls as required.
1. Before installation, please make sure the VE2812PR is set to PoH PSE or
PoH PD mode using the DIP switch for your installation requirement.
Set the PoH PSE & PD switch to
PSE
: The VE2812PR receives power
from the power adapter and delivers power to a PoH PD-supported
device through its HDBaseT input port.
Set the PoH PSE & PD switch to
PD
: The VE2812PR receives power
from a PoH PSE-supported device through its HDBaseT input port.
2. Use a grounding wire to ground the unit by connecting one end to the
grounding terminal, and the other end to a suitable grounded object.
Monitor
VE2812AT
(recommended)
IR emitter / receiver
RS-232
VK Control System
Power
IR
IR emitter /
receiver
Power Adapter
Speakers
PC
8
3
6
4a
7a
7b
HDMI
Audio
HDBaseT
IR
5
6
2
4b
4c
2
VE2812PR
(Front)
VE2812PR
(Rear)