
VE2812R / VE2812PR User Manual
7
VE2812PR Rear View
No. Component
Description
1
HDBaseT in
Connects to the HDBaseT output port on a
compatible ATEN video transmitter via a Cat 5e / 6 /
6a / ATEN 2L-2910 cable.
2
PoH PSE & PD switch
Sets the unit between PSE and PD mode.
PSE: The unit receives power from the power
adapter and delivers power to a PoH PD-sup
-
ported device through its HDBaseT input port.
PD: The unit receives power from a PoH PSE-
enabled Tx through its HDBaseT input port.
3
RS-232 serial port
Connects to an RS-232 main controller, such as a PC
or Control system.
4
RS-232 serial
communication switch
Sets the RS-232 serial interface for signal
Bypass
or
Command
. For details, see page 17.
5
long reach mode switch
Put the switch to
ON
to enable the long reach mode.
For more details on long reach mode, see page 20.
6
firmware upgrade switch
This port is reserved for ATEN Technical Support. If
you would like to do a firmware upgrade yourself,
please contact your dealer.
7
power jack
Connects to the power adapter.
3
2
1
4
6
7
5